Exceeding international standards (UL, CSA, CE, ISO 9001:2015), our conversion modules power continuous mission-critical deployments across the Kingdom of Saudi Arabia.
Heavy-duty industrial diode bridge rectifier module for 220V AC input environments, ideal for harsh electroplating & high-current DC application cells.
High-efficiency telecom base station power module compatible with ETP48-200 shelves. Supports hot-swap redundancy for 5G network nodes in Riyadh.
Ultra-wide output range 150-1000V DC 133A module with CE & TUV certification, specifically tailored for fast-charging infrastructure projects across KSA.
Continuous-operation power supply unit featuring optimized heat sink geometry designed for long-term reliability in high ambient temperature enclosures.
Original 48V 2000W high-efficiency telecom rectifier. Digital active power factor correction for low Total Harmonic Distortion (THD) grid compliance.
High-density 4kW power conversion block engineered for central telecommunication hubs, outdoor cabinet power systems, and industrial power distribution.
Energy Star certified 3000W switch-mode power converter delivering >96% efficiency to minimize cooling loads in desert telecom shelters.
Industrial-grade 48V DC power conversion system engineered for mission-critical IT infrastructure, control automation, and enterprise data centers.
Deploying electrical automation hardware in the Central Region (Najd) of Saudi Arabia presents unique engineering challenges. With summer ambient shade temperatures routinely exceeding 48°C in Riyadh's 2nd and 3rd Industrial Cities (MODON), unconditioned outdoor control cabinets can easily reach internal ambient temperatures of **+65°C to +70°C**.
Standard off-the-shelf single-phase DIN-rail power supplies frequently suffer catastrophic thermal shutdowns or premature electrolytic capacitor failure under these conditions. Our single-phase AC/DC DIN-rail units and power modules utilize **high-grade 105°C low-ESR aluminum electrolytic capacitors**, oversized planar magnetics, and advanced thermal dissipation topologies.
Why specify German-engineered and industrial-grade power modules over standard commercial units for your Riyadh projects?
Buffers 30ms mains brownouts during heavy regional air conditioning switching spikes on 220V/230V single-phase lines.
Metal DIN-rail latches and spring-clamp terminal blocks rated to IEC 60068-2-6 for heavy industrial automation.
Pre-tested to IEC/EN 62368-1 and IEC/EN 61000-6-2 to ensure effortless SASO Product Certificate issuance.
From smart grid automation in Diriyah Gate to telecommunication shelters along the King Fahd Road, our single-phase power solutions are designed for mission-critical Saudi applications.
Large-scale commercial developments across King Abdullah Financial District (KAFD) require rock-solid 24VDC control power for variable air volume (VAV) controllers, chillers, and localized BACnet gateway nodes.
Standardized DIN-rail switch-mode supplies for automated packaging machines, conveyor lines, and processing equipment deployed across Riyadh Industrial City 1st, 2nd, and 3rd phases.
Continuous-duty 48VDC rectifier modules (such as the Vertiv & Zhiheng units) installed in edge telemetry cabinets for mobily, STC, and Salam telecommunication infrastructure across Najd province.
Modular AC/DC rectifier modules delivering up to 1000V DC bus outputs for commercial charging stations being deployed in accordance with Saudi Arabia's green mobility goals.
Providing isolated auxiliary DC power to remote RTU/PLC systems monitor water transmission pipelines managed by SWCC (Saline Water Conversion Corporation) connecting eastern plants to Riyadh hubs.
Wide-input DC-to-DC converters and AC/DC chargers seamlessly integrating solar PV string arrays with 24V/48V battery banks in remote agricultural and off-grid desert security outposts.
Under the framework of Saudi Vision 2030 and the National Industrial Development and Logistics Program (NIDLP), the Kingdom of Saudi Arabia is experiencing an unprecedented industrial expansion. Riyadh is rapidly emerging as the principal manufacturing and logistical center of the Middle East.
Key market vectors driving the demand for advanced single-phase AC/DC DIN-rail power supplies include:
Procurement Tip: Ensure your DIN-rail power supplies carry comprehensive CB Scheme Test Reports (IEC 62368-1 / IEC 61010-2-201) to expedite approval through SASO-accredited certification bodies.
Compare our industrial power supply architecture ranges for localized Saudi project selection.
| Series Category | Nominal AC Input | Output Voltage Options | Power Reserve / Peak Load | Thermal Derating Profile | Protection Classes |
|---|---|---|---|---|---|
| Standard Industrial Single-Phase | 85 – 264 VAC Universal | 12V, 24V, 48V DC | 150% for 5 Seconds | 100% Load up to +55°C Derate 2.5%/°C to +70°C |
IP20 Metal Frame, OVP, OCP, OTP |
| Conformal-Coated Harsh Duty | 90 – 264 VAC / 120-370 VDC | 24V DC (Adjustable 22-28V) | 150% Power Boost for 4s | 100% Load up to +60°C Derate 2.5%/°C to +70°C |
Acrylic Conformal Coat, Salt Spray Tested |
| High-Power Telecom Rectifiers | 185 – 290 VAC Single-Phase | 48V DC (Nominal 54V/58V) | Active Current Sharing | 100% Load up to +50°C Derate 2.0%/°C to +65°C |
Hot-Swap Plug-In, Digital CAN Bus, IP20 |
| EV Fast-Charging Modules | 260 – 485 VAC 3-Phase/Single-Phase | 150 – 1000 VDC Adjustable | Constant Power Curve | 100% Load up to +55°C Active Force Air Cooling |
CE, TUV, Short-Circuit, Over-Temp Protection |
Combining German-engineered design precision with direct local export and technical support serving Riyadh, Dammam, and Jeddah.
100% owned fabrication facilities audited regularly by TÜV Germany. Every unit undergoes automated optical inspection (AOI), full-load burn-in testing, and automated electrical safety verification before export packaging.
Established supply chain routes direct to King Khalid International Airport (RUH) air cargo hubs and King Abdul Aziz Port / Riyadh Dry Port, ensuring streamlined customs clearance with complete SABER certification packs.
Engineering modifications tailored to OEM platforms: specialized pin connectors, pre-set output voltages, modified PCB conformal coatings, and customized housing brackets for non-standard enclosure mounting.
Our application engineers assist local Saudi panel builders and EPC contractors with thermal derating calculations, redundancy module design (N+1), parallel load sharing, and EMC filter selection.
Technical and logistical insights for procuring single-phase DIN-rail power supplies in Saudi Arabia.
Connect directly with our senior application engineers for your Riyadh project requirements.
