Precision Industrial DC Sources

AC/DC Variable Programmable DC Power Supplies 480W–100kW

High-precision voltage and current regulated switch-mode power supplies engineered in Germany for industrial automation, end-of-line testing, and laboratory integration.

480W – 100kWScalable Power Range
0 – 400V DCProgrammable Voltage
0 – 185A DCProgrammable Current
0–10V / USBAnalogue & Digital Control
Engineering Excellence

Precision Variable DC Sources for Automation & Test Cells

CAMTEC programmable AC/DC power supplies bridge the gap between sensitive laboratory instrumentation and rugged industrial control cabinets. Designed for 24/7 continuous duty, our HSEUREG, HSEUiREG, and CPS-i series replace bulky benchtop units with ultra-compact TS35 DIN-rail, wall-mount, or 19-inch rack-mount form factors.

Featuring zero-gap programmable output stages, these high-efficiency power supplies allow seamless adjustment of voltage (CV) and current (CC) via standard 0–10V / 0–5V analogue signals, potentiometer controls, or digital software interfaces via USB/RS485.

  • Continuous CV/CC Control: Smooth operation down to zero volts and zero amperes without drop-outs.
  • German Fabrication Quality: 100% manufactured in Pfinztal, Germany under strict ISO 9001:2015 quality standards.
  • Industrial Interface Options: Galvanically isolated analogue control, USB 2.0 interface, and custom bus protocol support.
  • Scalable Architecture: Parallel setup capable of scaling system output up to 100kW total power.
CAMTEC Programmable Power Supply Manufacturing Facility
DIN-Rail Programmable Series

HSEUREG & HSEUiREG Series (480W – 1000W)

Space-saving DIN-rail programmable power supplies optimized for cabinet installation, automated test stations, and industrial process calibration.

HSEUREG04801 480W Voltage Programmable DC Power Supply 480W · Voltage Programmable

HSEUREG04801 Series

High-stability DIN-rail source with voltage regulation from 0V up to 180V DC. Fixed high-current output up to 26A for demanding dynamic loads.

Output VoltageContinuous Current
0–15V DC26.0 A
0–30V DC16.0 A
0–50V DC10.0 A
0–90V DC5.3 A
0–130V DC3.7 A
0–180V DC2.7 A
HSEUiREG04801 480W Voltage & Current Programmable DC Power Supply 480W · Voltage & Current Programmable

HSEUiREG04801 Series

Fully programmable dual-mode (CV/CC) DIN-rail power source with independent 0–10V programming inputs for voltage and current parameters.

Programmable VoltageProgrammable Current
0–18V DC0–40.0 A
0–30V DC0–24.0 A
0–50V DC0–15.0 A
0–90V DC0–8.0 A
0–130V DC0–5.5 A
0–180V DC0–4.0 A
0–240V DC0–3.0 A
HSEUREG07201 720W Voltage Programmable DC Power Supply 720W · Voltage Programmable

HSEUREG07201 Series

Mid-power programmable voltage source featuring fast transient response, low ripple noise, and robust convection cooling for control panels.

Output VoltageContinuous Current
0–15V DC35.0 A
0–30V DC24.0 A
0–50V DC15.0 A
0–90V DC8.0 A
0–130V DC5.5 A
0–180V DC4.0 A
HSEUiREG07201 720W Voltage & Current Programmable DC Source 720W · Voltage & Current Programmable

HSEUiREG07201 Series

720W industrial power supply offering flexible programming up to 240V DC. Ideal for battery simulation, electroplating, and sensor testing.

Programmable VoltageProgrammable Current
0–18V DC0–40.0 A
0–30V DC0–30.0 A
0–50V DC0–18.0 A
0–60V DC0–15.0 A
0–90V DC0–10.0 A
0–130V DC0–7.0 A
0–180V DC0–5.0 A
0–240V DC0–3.8 A
HSEUREG10001 1000W Programmable DIN-Rail Power Supply 1000W · Voltage Programmable

HSEUREG10001 Series

Kilowatt-class DIN-rail power source delivering robust output power up to 50A. Features analog interface, sense compensation, and monitoring signals.

Output VoltageContinuous Current
0–15V DC50.0 A
0–30V DC33.0 A
0–50V DC20.0 A
0–90V DC11.2 A
0–130V DC7.8 A
0–180V DC5.6 A
HSEUiREG10001 1000W Voltage & Current Programmable DC Power Supply 1000W · Voltage & Current Programmable

HSEUiREG10001 Series

High-voltage capable 1kW DIN-rail power supply adjustable up to 400V DC. Designed for component burn-in, motor test beds, and DC drive simulation.

Programmable VoltageProgrammable Current
0–18V DC0–50.0 A
0–30V DC0–42.0 A
0–50V DC0–25.0 A
0–90V DC0–14.0 A
0–130V DC0–9.5 A
0–180V DC0–7.0 A
0–240V DC0–5.3 A
0–400V DC0–3.2 A
High Power & Scalable Systems

CPS-i Series Modular Power Supplies (1.5kW – 100kW)

Heavy-duty programmable DC platforms for high-current industrial applications, automated testing, and scalable cabinet power systems.

CPS-i1500 1500W Variable Programmable DC Power Supply 1500W · DIN-Rail Mount

CPS-i1500 Series

Ultra-compact 1.5kW programmable DC source featuring active PFC, power-boost capacity, and wide voltage output models up to 400V DC.

Programmable VoltageProgrammable Current
0–18V DC0–75.0 A
0–30V DC0–62.0 A
0–60V DC0–31.0 A
0–90V DC0–21.0 A
0–150V DC0–12.5 A
0–300V DC0–6.3 A
0–400V DC0–4.7 A
CPS-i2000 2000W Modular Programmable Power Supply 2000W · Rack / Wall Mount

CPS-i2000 Modular Series

High-current 2kW modular power supply engineered for 19-inch subracks and wall mounting. Supports active current sharing in parallel operations.

Programmable VoltageProgrammable Current
0–18V DC0–165.0 A
0–30V DC0–100.0 A
0–60V DC0–50.0 A
0–90V DC0–33.0 A
0–150V DC0–20.0 A
CPS-i3000 3000W High Power Programmable DC Source 3000W · Modular Up to 100kW

CPS-i3000 Scalable Platform

3kW modular programmable building blocks. Connect multiple units in master-slave parallel configuration to deliver up to 100kW output power.

Programmable VoltageProgrammable Current
0–18V DC0–185.0 A
0–30V DC0–125.0 A
0–60V DC0–62.5 A
0–90V DC0–41.5 A
0–150V DC0–25.0 A
0–300V DC0–12.5 A
Digital Control & Software

USB2.0 UI.Drive Interface & Control Software

Engineered for laboratory test automation, system integrators, and software-driven quality inspection cells, CAMTEC provides dedicated digital interface packages for the HSEUiREG and CPS-i power supply series.

The USB2.0 UI.Drive module enables precise digital control of voltage and current set-points, automated ramp programming, live telemetry logging, and status diagnostics via PC software.

  • Wide OS Compatibility: Fully compatible with Windows environments and laboratory control automation packages.
  • Software Integration: Ready drivers and protocols for WinLab, LabVIEW, and automated test environments.
  • Galvanic Isolation: Complete optical isolation protecting host controllers and PC hardware from industrial transients.
  • Real-Time Monitoring: Live monitoring of output voltage, actual load current, power stage temperature, and alarm states.
USB2.0 UI.Drive Interface Module for CAMTEC Programmable Power Supplies

USB2.0 UI.Drive Hardware Converter

Pluggable communication module transforming standard analogue programming inputs into a digital USB control interface.

Key Advantages

Why Engineers Select CAMTEC Programmable Sources

Built to perform in environments where commercial lab power supplies fail. Discover the core engineering features built into every unit.

Zero-Down Control

Linearized programming circuits ensure absolute zero-voltage and zero-current capability without output instability or ripple degradation.

Sense Line Compensation

Automatic lead-drop compensation maintains calibrated voltage stability directly at the load terminals, overcoming cable line losses.

Thermal & Overload Immunity

Equipped with continuous short-circuit protection, over-voltage protection (OVP), and thermal derating protection for harsh 24/7 operation.

Global Certifications

Fully compliant with EN62368-1, EN61000-6-2/3 EMC requirements, RoHS, REACH, and certified for worldwide OEM deployment.

Request Technical Data & Datasheets

Contact our power electronics application team for customized voltage ranges, CAD files, or technical consultation.

Get Catalog